Sign plates are 12" x 15", and made of .080" aluminum with engineer grade retro-reflective coating. Weight: 1.5 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign...
◾ 18" x 15" ◾ .080" aluminum ◾ Engineer grade retro-reflective coating ◾ Signs feature a picture to supplement the sign plate wording ◾ Fits any existing Aldon sign holder Weight: 2 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special...
Item #: 6SMAW-R Sign plates are 12" x 15", and made of .080" engineer grade retro-reflective aluminum. Weight: 1.5 lbs Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign...
Sign plates are 12" x 15", and made of .080" aluminum with engineer grade retro-reflective coating. Weight: 1.5 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates...
Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...
Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...
Aluminum sign plate: 12" x 15" x .080" thick. Weight 2 lbs.
Limit & Clearance Signs
We have a wide variety of limit and clearance signs. Visit our website to see all of our signs.
Item #: 4015-197 Aluminum 30" dia. x .080" Weight 4 lbs.
Track Signs
Item # 4015-159 Track (number) Mount these 7" x 13" signs on a tie by the switch stand. Weight: 1 lbs.
Switch (number) Sign Plate
Item # 4015-166 Switch (number) Sign Plate Mount these 7" x 13" signs on a tie by the switch stand. Weight: 1 lbs.
Caution Signs
Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...
Danger Signs
Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...
Spanish and French Signs
Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or create a fully...
Item #: 4015-71 ◾ 10" diameter, round, printed on both sides of 0.08" aluminum. Weight: 0.75 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can add...
Repair Shop Signs
Sign plates are 12" x 15", and made of .080" engineer grade retro-reflective aluminum. Weight: 1.5 lbs. Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates We can...
Explore our wide range of railroad sign plates we offer. ◾ OSHA-Mandated Sign Plates Standard and Special Purpose ◾ Railyard Safety / Warning Signs ◾ Speedy Custom Sign Plates Weight: 3 lbs. We can add your Corporate ID or special text to our standard OSHA- Mandated sign plates, or...
◾ Keep workers and switching crews aware of rail car status. ◾ Aluminum sign plate (.080” thick) lettered on both sides, with powerful rare-earth magnet that strong wind cannot dislodge. Sticks to side of car or end-strut. Handle makes removal easier ◾ Change signs as car status changes...
Brake Sticks
No need to climb up on a ladder to apply railcar hand brake. User can tighten and release brakes, align car coupler knuckles, operate angle locks, and re-set end-of-train warning devices. Can be purchased with or without magnetic handle. Without Magnetic Handle 4123-104 "Short", 24"-...
Flashing Blue LED Light for Sign Holders and Chocks
Item #: 4115-01 ◾ Barricade-style, 7 in. diameter shatterproof Lexan lens. ◾ Uses two 6-volt Lantern batteries. ◾ Battery case bolts to light-bracket. ◾ On-off switch and photo-electric cell. ◾ Flashes 60 times/min. ◾ Other lens colors available. Weight: 2 lbs. Batteries NOT included
Gatemaster I
Item #: 4020-05 Our Gatemaster openers are compact, simple-to-use manual tools for hard-to-open gates. Through planetary gear reduction in the Gatemaster head, the worker's handle effort is multiplied 18-1/2 times — a considerable mechanical advantage. A maximum torque output of 3,200 ft.-lbs...
Gatemaster II
Item #: 4020-06 Our Gatemaster openers are compact, simple-to-use manual tools for hard-to-open gates. Through planetary gear reduction in the Gatemaster head, the worker's handle effort is multiplied 18-1/2 times for Gatemaster I — a considerable mechanical advantage. A maximum torque output of...
Kerosene Switch Heater
Item #: 4124-08 The 3-gallon capacity HEATER keeps switchpoints dry in winter. The HEATER is placed between the ties under the tip of the point, with the flame just beneath the point. Temperature extremes may require more than one HEATER for each point. The flame should burn for 96 hours on a full...
Railroad Crossbuck Sign - Hi-Intensity
Item #: 4015-74 ◾ 2 blades when assembled form 34" x 34" span. ◾ Each blade is .080 aluminum. 9" x 48" Weight: 20 lbs. Requires mounting brackets (sold separately, in pairs) Item #: 4115-96 Large Brackets for 4" dia. pole Item #: 4015-199 Small Brackets for 2-3/8" dia. pole
Small Brackets for Crossbuck (pair)
Item #: 4015-199 ◾ Need one pair of brackets per Crossbuck sign. ◾ Brackets sold in pairs. ◾ Aluminum brackets for 2-3/8" diameter pole. Weight 1 lb.
Large Brackets for Crossbuck (pair)
Item #: 4115-96 For Joint Bar Sockets. ◾ Aluminum brackets for 4" diameter pole. ◾ Brackets sold in pairs. Need one pair of brackets per Crossbuck sign. Weight: 2 lbs.
Track Bolt Ratchet Wrench & Sockets
Item #: 4123-112 For Joint Bar Sockets. ◾ Powerful leverage and ratchet convenience in one wrench. ◾ Aluminum brackets for 2-3/8" diameter pole. ◾ Handle is 38" long, with 1" square drive. Weight: 11 lbs.
Item #: 4015-293 Mount in front of overhead doorways or use on any flush rail application to keep your employees safe. ◾ When impacted, Flex-E Form sign holders are designed to spring back to an upright position. ◾ Secured by three powerful neodymium magnets and removed in seconds with...
Flex-E Form Removal Tool
Item #: 4015-294 Tool designed for the installation and removal of the Magnetic Flex-E Form Sign Holder (Item #: 4015-293). Sign holder and signs sold separately.
Item #: 4015-54 No other sign holder can attach itself to flush rail like our Magnet Base Holder. ◾ Aluminum holder utilizes a pair of powerful rare-earth magnets to grip to exposed or flush rail. ◾ No more bending or stooping to get a clamp around the rail. The worker simply places the...
Item #: 4015-01 Steel holder clamps to rail head, for easy placement and easy removal Weight 7 lbs. *Sign plates are not included. View and order our standard wording OSHA mandated sign plates from our website.
Item #: 4015-241 The ultimate in Blue Flag protection for workers in rail yards: If you can't couple to a rail car, you can't pull the car. Coupler Lock shaft fits sign post hole found on all railway couplers. The steel "cage" in the middle of the shaft fits inside the knuckle of the coupler,...
Item #: 4015-93 Spur Track Guardian Package Includes: ◾ Hinged sign holder, hand-lifted (see 4015-122 for foot-operated "Mousetrap" feature) ◾ Blue 12" x 15" 0.080 aluminum sign plate. ◾ Solar Powered flashing blue light. Shock-proof and NEMA-4X rain and dust proof. ◾ Gravity switch...
Item #: 4015-95 Save your back and protect your rail siding with our ergonomic sign holder design. Step down on the pedal and the spring-action holder drops beneath the top of rails. Step down on the roll pin, to raise the sign holder to an upright position. The sign holder can be padlocked in...
Magnet base solar lantern
Item #: 4015-180 ◾ Rare earth 60 lb. pull magnet keeps lantern secure on top of rail. ◾ Brilliant 4 LED flashing blue light operates up to 22 nights on full battery charge. ◾ Lantern must be used in upright position. ◾ Light turns off when lantern is titled 45 degrees or more. ◾ To...
Item #: 4015-06 ◾ Tie plate base is spiked to tie. ◾ Hinged sign holder folds down in either direction. ◾ Two track spikes are included. ◾ Lockable. Sign plate and padlock sold separately. Weight 10 lbs.
Item #: 4015-93 Day or night, always on duty. OSHA-mandated blue sign and blue light provide round the clock warning that the spur track is off limits to traffic unless plant workers authorize entry. Spur Track Guardian Package Includes: ◾ Hinged sign holder, hand-lifted (Item #: 4015-122 for...
Item #: 4015-230 ◾ Use the rail as a sign holder. ◾ Powerful rare earth magnet keeps holder in place on the rail. ◾ Accepts 12" x 15" sign plate. Weight: 5 lbs. Sign plate NOT INCLUDED. Standard wording OSHA mandated sign plates can be ordered from our website: aldonco.com
Switch Cube® Indicator Yellow RIGHT turnout
Item #: 4015-165 EASY TO INSTALL (requires only a wrench) ◾ Fits round and square masts for all switch stand models. ◾ Package includes mounting platform and four sign plates. ◾ Sign plates are 0.018" aluminum, 8"x10" with retro-reflection coating for visibility. ◾ 8"x10" plates can be...
Switch Cube® Indicator White LEFT turnout
Item #: 4015-213 EASY TO INSTALL (requires only a wrench) ◾ Fits round and square masts for all switch stand models. ◾ Package includes mounting platform and four sign plates. ◾ Sign plates are 0.018" aluminum, 8"x10" with retro-reflection coating for visibility. ◾ 8"x10" plates can be...
Switch Cube® Indicator White RIGHT turnout
Item #: 4015-214 EASY TO INSTALL (requires only a wrench) ◾ Fits round and square masts for all switch stand models. ◾ Package includes mounting platform and four sign plates. ◾ Sign plates are 0.018" aluminum, 8"x10" with retro-reflection coating for visibility. ◾ 8"x10" plates can be...
Switch Cube® Indicator Red LEFT turnout
Item #: 4015-284 EASY TO INSTALL (requires only a wrench) ◾ Fits round and square masts for all switch stand models. ◾ Package includes mounting platform and four sign plates. ◾ Sign plates are 0.018" aluminum, 8"x10" with retro-reflection coating for visibility. ◾ 8"x10" plates can be...
Switch Cube® Indicator Red RIGHT turnout
Item #: 4015-285 EASY TO INSTALL (requires only a wrench) ◾ Fits round and square masts for all switch stand models. ◾ Package includes mounting platform and four sign plates. ◾ Sign plates are 0.018" aluminum, 8"x10" with retro-reflection coating for visibility. ◾ 8"x10" plates can be...
Switch Cube® Indicator Yellow LEFT turnout, illuminated
Item #: 4015-164-I Solar-powered illuminated Switch Cube® Direction Indicator. Package includes mounting platform and four sign plates. Signplates are 0.018" aluminum, 8"x10" with retro-reflection coating for visibility. Specifications ◾ Symbols are identifiable from as far as 250 feet. All...
Switch Cube® Indicator Yellow RIGHT turnout, Illuminated
Item #: 4015-165-I Solar-powered illuminated Switch Cube® Direction Indicator. Package includes mounting platform and four sign plates. Signplates are 0.018" aluminum, 8"x10" with retro-reflection coating for visibility. Specifications ◾ Symbols are identifiable from as far as 250 feet. All...
Racor Target - Red/White
Item #: 4015-207 ◾ For Racor manual switch stands: 22E and 36E. ◾ Fits 1-1/2" square adapter sleeve. ◾ Sold in set of 1 red and 1 white plate. Weight: 2 Lbs. Adapter sleeve is sold separately.
Racor Target - Yellow/Green
Item #: 4015-209 ◾ For Racor manual switch stands: 22E and 36E. ◾ Fits 1-1/2" square adapter sleeve. ◾ Sold in set of 1 yellow and 1 green plate. Weight: 2 Lbs. Adapter sleeve is sold separately.
Racor Target - Red/Green
Item #: 4015-206 ◾ For Racor manual switch stands: 22E and 36E. ◾ Fits 1-1/2" square adapter sleeve. ◾ Sold in set of 1 red and 1 green plate. Weight: 2 Lbs. Adapter sleeve is sold separately.
Item #: 4015-224 ◾ Kit Includes mounting platform, 4 sign plates, and mounting bolts. ◾ Mounting sleeve fits most switch stands. ◾ Also available in Illuminated model (Item# 4015-224-I). Weight 10 lbs If you have any questions please contact our office.
Switch Cube® Indicator for Stem of Wye Track, Illuminated
Item #: 4015-224-I ◾ Kit Includes mounting platform, 4 sign plates, and mounting bolts. ◾ Sign plates are 0.018" aluminum, 8"x10" with retro-reflection coating for visibility. Specifications ◾ Symbols are identifiable from as far as 250 feet. All LEDs have narrow beam widths for maximum...
Switch Frog Crane Tongs
Item #: 4123-125 Capacity 8 tons. Fits all standard frogs. (Not for self-guarded frogs.) Weight 46 lbs.
Rail Tong (Manual Type)
Item #: 4123-14 Weight 18 lbs.
Skidding Tongs
Item #: 4123-15 21" jaw opening Weight 10 lbs.
Air Hose Wrench
Item #: 4124-60 Jaw opening 2-3/8" fits hex nut on railcar air line. Weight: 9 lbs
Magnetic Hand Spike Setter
Item #: 4123-132 Hold spike in place with this magnetic tool. Weight 1 lb.
Item #: 4015-05 NO DRILLING REQUIRED ◾ Clamps to base of rail. ◾ Holder folds down flat. ◾ Can be padlocked in active position (padlock not included). Weight 10 lbs. Sign plate not included. Visit our website to view our full line of sign plates.
Item #: 4015-188 ◾ For temporary installation in track ballast. ◾ Sign holder is 1" sq. steel tube, 48" long, drilled for 12"x15" OSHA blue flag signs. Hammer the sharp 12" long spear point into the ground using the included hammer punch. To remove, strike square socket with hammer and pull...
Solar Flashing Light, Amber, with Bolting Bracket
Item #: 4015-57 ◾ Solar light with 360° visibility. ◾ Flashes 60 times per minute. Brilliant 6 LED light visible for a mile. ◾ Solar battery operates 8 consecutive nights without recharging. ◾ Fully recharges with 2 sunny hours or 8 cloudy hours. ◾ External on/off push-button conserves...
Nylon Flags (assorted colors)
◾ Hemmed sleeve, for 18" long dowel staff. ◾ Size 12" x 15". ◾ Flags are priced and sold individually, not as a pair. Weight 1 lb. Item: 4015-12 (Blue) Item: 4015-22 (Green) Item: 4015-91 (Orange) Item: 4015-20 (Red) Item: 4015-92 (White) Item: 4015-21 (Yellow) Item: 4015-120 (Yellow/Red) Item:...
Tank Car Tool & Socket Hanging Tool Tray (with drip proof lid)
Item #: 4024-282 ◾ Our Hanging Tool Tray (With Lid) provides additional protection by keeping small tools safe and dry from the earth’s natural elements when working on tank and hopper cars. ◾ Tray legs fit up to 2" diameter railings on landing platforms and gangways. ◾ Welded...
Hanging Tool Tray (without drip proof lid)
Item #: 4024-280 A convenient place to keep small tools when working on the roofs of tank cars and hopper cars. ◾ Tray legs fit up to 2" diameter railings on landing platforms and gangways. ◾ Welded aluminum with durable yellow powder coat finish. Drain holes in each corner allow for...
Item #: 4011-50 ◾ The holder has four brackets that allow you to store rail chocks or sign holders without bending or stooping. ◾ Keeps products elevated away from snow, water and other elements. ◾ Avoids trip hazard. ◾ Can easily be installed in track ballast, turf and asphalt by four heavy...
Warning Light and Horn
Item #: 4024-08 ◾ Flashing amber light and loud horn alert workers that a car is in motion. ◾ Compact unit mounts to hole in coupler. ◾ When car moves, light and horn are instantly activated. ◾ When car stops, light and horn will continue active for about two seconds. ◾ High impact...
Item #: 4015-135 ◾ Solar-powered blue flashing light includes mounting bracket to attach to any square or flat sign holder. ◾ Shock proof and NEMA-4X rain and dust proof. Gravity switch (light turns off at 45° angle). Note: The mounting bracket for attaching to a derail sign holder is...
Flashing Solar Combo Light With Mounting Bracket
Item #: 4015-205 ◾ Solar-powered combination blue flashing light on top and white flashing light below. ◾ Both are brilliant LED lights visible for over a mile. ◾ White light illuminates sign plate. ◾ Includes mounting bracket to attach to any square or flat sign holder. ◾ Shock proof...
Item #: 4015-237 Powerful rare earth magnet grips like iron to side of car or end-strut. ◾ 360° solar powered blue light projects 12" from side of rail car. ◾ Light fully re-charges with two hours of sunlight or eight hours of cloudy skies. ◾ On/Off button on bottom of light. ◾ Gravity switch...
Hydraulic Track Jack
Item #: 4123-81 ◾ Hydraulic track jack provides low handle effort. ◾ Can be used for lifting (vertical) only. Not to be used for pushing (horizontal) applications. ◾ Inverted cylinder design helps keep water and debris out of the jack. Specifications: ◾ Lifting Capacity: 10-ton ◾ Stroke:...
Mechanical Track Jack
Item #: 4123-65 ◾ Mechanical track jack provides low handle effort. Can be used for lifting (vertical) or pushing (horizontal) applications. ◾ Forged and heat treated components for strength and long service life. Does not accept lining bar for handle. ◾ Does not accept lining bar for...
Item #: 4123-63 Mechanical track jack provides low handle effort. Can be used for lifting (vertical) or pushing (horizontal) applications. Forged and heat treated components for strength and long service life. Quick-trip mechanism allows load to be instantly dropped. Accepts any 1-1/2” square...
Item #: 4123-64 Mechanical track jack provides low handle effort. Can be used for lifting (vertical) or pushing (horizontal) applications. Forged and heat treated components for strength and long service life. Quick-trip mechanism allows load to be instantly dropped. Accepts any 1-1/2” square...
AL-102 Rolling Gauge Reader
Item #: 4022-10 ◾ Measure up to 2 inches gauge variation while walking down the track. ◾ Spring-action telescopic assembly expands and contracts as gauge changes. ◾ Worker can read gauge while walking by looking down at a lens and gauge scale. ◾ Steel roller bearings measure gauge...
Magnet Base Solar Lantern
Item #: 4015-180 ◾ Rare earth 60 lb. pull magnet keeps lantern secure on top of rail. ◾ Brilliant 4 LED flashing blue light operates up to 22 nights on full battery charge. ◾ Lantern must be used in upright position. Light turns off when lantern is titled 45 degrees or more. ◾ Solar...
Item #: 4015-03 Gooseneck handle fits into hole in coupler. Sign plate NOT INCLUDED. Visit aldonco.com to view all of our OSHA mandated sign plates. Weight 4 lbs.
Air Hose Wrench
Item #: 4124-60 Jaw opening 2-3/8" fits hex nut on railcar air line. 9 lbs
Track Bolt Ratchet
Item #: 4123-112 Powerful leverage and ratchet convenience in one wrench. Handle is 38" long, with 1" square drive. Weight 11 lbs. Visit aldonco.com to view our wide range of sockets.
1" Square Drive Hex (Standard Socket)
Item #: 4124-230 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-231 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-232 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-233 Size: 1-9/16" Broach Depth: 7/8" Item #: 4124-234 Size: 1-5/8" Broach Depth: 7/8" Item #: 4124-235 Size: 1-11/16" Broach...
1" Square Drive Hex (Deep Socket)
Item #: 4124-243 Size: Size: 1-1/4" Broach Depth: 11/16" Item #: 4124-244 Size: 1-5/16" Broach Depth: 3/4" Item #: 4124-245 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-246 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-247 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-248 Size: 1-9/16" Broach...
1" Square Drive 8 Point (Standard)
Item #: 4124-141 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-142 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-112 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-126 Size: 1-9/16" Broach Depth: 7/8" Item #: 4124-145 Size: 1-5/8" Broach Depth: 7/8" Item #: 4124-124 Size: 1-3/4" Broach Depth:...
1" Square Drive 8 Point (Deep)
Item #: 4124-110 Size: 1-1/4" Broach Depth: Item #: 4124-140 Size: 1-5/16" Broach Depth: 3/4" Item #: 4124-127 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-111 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-143 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-144 Size: 1-9/16" Broach Depth:...
3/4" Square Drive Hex (Deep)
Item #: 4124-260 Size: 1-1/4" Broach Depth: 11/16" Item #: 4124-261 Size: 1-5/16" Broach Depth: 3/4" Item #: 4124-262 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-263 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-264 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-265 Size: 1-9/16" Broach Depth:...
3/4" Square Drive 8 Point (Deep)
Item #: 4124-129 Size: 1-1/4" Broach Depth: 11/16" Item #: 4124-02 Size: 1-5/16" Broach Depth: 3/4" Item #: 4124-137 Size: 1-3/8" Broach Depth: 3/4" Item #: 4124-156 Size: 1-7/16" Broach Depth: 3/4" Item #: 4124-03 Size: 1-1/2" Broach Depth: 7/8" Item #: 4124-04 Size: 1-9/16" Broach Depth:...
Item #: 4015-32 ◾ Small but brilliant flashing mini-light with magnet base/steel clip. ◾ Fits all derails and sign holders, except: 4015-02, 4015-03, and 4015-04. Weight: 2 oz.
Item #: 4124-210 Combination tool measures head wear vertically and horizontally to an accuracy of 1/32 of an inch. Rail sizes 112, 115, 119, 132, 133, 136 and 141 lbs./yd. Made of aluminum. Weight 5 lbs.
Item #: 4015-07 ◾ Steel holder clamps to rail head for easy on and easy off. ◾ Padlock included ◾ Padlocked holder cannot be removed from rail. ◾ Fits rail sizes from 90 to 141. Weight 10 lbs. Sign plate NOT INCLUDED. Visit our website to view and order standard OSHA-mandated sign plates from...
Item #: 4015-10 ◾ Clamp-on steel sign holder fits rails 75 lbs./per yard and up. ◾ Anti-roll bars hold sign holder to rail in 75 mph wind. ◾ Easy-Reach locking arm. ◾ Brass padlock included. Weight 10 lbs. Sign plate NOT INCLUDED. Visit our website to view and order standard OSHA-mandated...
Stop Men At Work (Blue)
Item #: 6SMAW-B Sign plates are 12" x 15", and made of .080" aluminum with engineer grade retro-reflective coating. 1.5 lbs.
Hatch Key® Pry Bar Heavy-Duty model
Item #: 4020-17 Save your back and your fingers. Stubborn hatch covers yield to the leverage in our specially shaped bar. Worker should be secured to fall protection cable while using Hatch Key® Pry Bar. Weight 12 lbs. * Consider using the Handle Loop (Item #: 4024-302) to tether your Hatch...
Hatch Key® Pry Bar Standard Model
Save your back and your fingers. Stubborn hatch covers yield to the leverage in our specially shaped bar. Worker should be secured to fall protection cable while using Hatch Key® Pry Bar. Weight 6 lbs. * Consider using our Handle Loop (4024-302) to tether your Hatch Key® Pry Bar.
5 ft. Pry Bar For Swing Doors On Open Top Hopper Cars
Item #: 4020-12 The five foot pry bar gives the worker good leverage to swing and lift heavy car doors. Lower section of bar is made of heat-treated alloy steel, machined to a narrow wedge end for working into a variety of sockets and forcing stubborn door locks. Weight 13 lbs.
Easy-Slide® Door Opener
Item #: 4020-13 *PRICE MAY VARY ON CUSTOM MODELS* NON-RETURNABLE / NON-REFUNDABLE For dockless rail siding where access to the car door is through a doorway. Easy-Slide® satisfies OSHA's "de minimus" exception to the ban against using forklift blades directly to open box car doors. Welded steel...
Pop-Top Pry Bar for Tank Car Manhole Cover (All Steel)
Item #: 4020-18 Much Better than a Crowbar! Designed to engage the grab-handle of tank car manway covers. Five-foot steel pipe handle and a rocking foot provide the leverage to overcome suction caused by the difference in atmospheric pressure outside the tank car and inside. When using the pry...
"Spark Proof" Tank Car Pry Bar (Spark-Resistant Aluminum)
Item #: 4020-19 Much Better than a Crowbar! Designed to engage the grab-handle of tank car manway covers. Five-foot aluminum pipe handle and a rocking foot provide the leverage to overcome suction caused by the difference in atmospheric pressure outside the tank car and inside. When using the pry...
Aluminum Wall Scraper (Scraper Blade)
Item #: 4023-03 (Pole sections and Paddle are sold separately) The Aldon Long Reach Wall Scraper is ideal for scraping hopper car and tank car interiors, as well as storage bin interiors. The heat-treated aluminum scraper paddle is five inches wide with a chisel edge. The aluminum pole is 6 feet...
Aluminum Wall Scraper (Scraper Pole)
Item #: 4023-04 (Pole sections and Scraper Blade are sold separately) The Aldon Long Reach Wall Scraper is ideal for scraping hopper car and tank car interiors, as well as storage bin interiors. The heat-treated aluminum scraper paddle is five inches wide with a chisel edge. The aluminum pole...
Poly Wall Scraper (Pole and Paddle sold separate)
Item #: 4124-104 (Pole) Item #: 4124-109 (Paddle) Fiberglass handle extends to 18 feet. Polyethylene paddle has a 10" wide blade. Useful for scraping down bin walls inside covered hopper cars. Pole: Weight 3 lbs. Paddle: Weight 2 lbs. (Pole sections and Paddle are sold separately)
Suspension Clamping Ring
Item #: 4024-302 For Tank Car Pry Bar (Item #: 4020-18) Orange ring clamps any 1-1/2” diameter handle to a tether. Load Limit: 100 Lbs
Item #: 4015-27A ◾ Mini-Light Blue (Magnet-Base). ◾ Quick Flash Mini-Lights. ◾ Twist lens on and off. ◾ Lithium coin cell battery gives 250 hours flashing life. ◾ Magnet base can be installed on any steel sign holder for instant blue light display.
Digital Mismatch Gauge
Item #: 4022-27 ◾ Designed to measure rail ends for mismatch on the gauge side and top side of rails. ◾ Maximum mismatch is ¼”. ◾ Excessive mismatch will prematurely wear wheels, rail ends, joint bars, and bolts. 𝗖𝗮𝘀𝗲 𝗶𝗻𝗰𝗹𝘂𝗱𝗲𝗱
Share your experience so buyers can make confident decisions.
